	FAQ for Executor [last updated 95-02-22]

This set of answers to Frequently Asked Questions is not designed to
take the place of our Executor manual.  However, currently our manual
is not available on-line, so this FAQ does briefly touch on some
issues that are covered more in depth in our manual.

In addition to this FAQ, there should be README files bundled with
Executor and there is also an Executor/DOS document that describes how
to get started with Executor/DOS from a DOS user's point of view,
which may be useful to users of Executor on other platforms as well.
That document is called "ERNSTOUD.TXT", since it's hard to come up
with useful names when constrained by the DOS 8.3 filename limits and
the author of the document is Ernst J. Oud.

Changes in this issue of the FAQ are denoted with ">>" in the beginning
of a line.

[1] Executor in General

	[1.1]  What is Executor?
	[1.2]  On which platforms is Executor available?
	[1.3]  Who makes Executor?
	[1.4]  Pronunciation?
	[1.5]  Does Executor require you to obtain ROMs or System Files
		from Apple?
	[1.6]  How long has Executor been in development?
	[1.7]  What techniques were used to rewrite the OS and Toolbox?
	[1.8]  What limitations does Executor have?
	[1.9]  Does Executor run all applications?
>>	[1.10]  What do the various Executor version numbers mean?
>>	[1.11]  Where can I pick up the Executor demos?
>>	[1.12]  Is Executor shareware?
>>	[1.13]  How do the demo versions differ from the commercial versions?
	[1.14]  What's next?
	[1.15]  When will 2.0 be out?
	[1.16]  How can I get in ARDI's beta program?
	[1.17]  Does Executor have networking support?
	[1.18]  How do you install Fonts and Desk Accessories (DAs)?
	[1.19]  Will Desk Accessories work under Executor?
	[1.20]  Does E/D run xxx?
>>	[1.21]  What's the best way to keep informed about Executor?
	[1.22]  Why shouldn't I send e-mail to ctm@ardi.com?
	[1.23]  What is an ".hfv" file?
>>	[1.24]  Can I launch apps directly from the command line?
>>	[1.25]  What are all the command line switches?
	[1.26]  Can I have Executor use more than 8Mb for the application zone?
	[1.27]	An app I'm trying crashes.  What should I do?
>>	[1.28]  How do Executor's "license keys" work?
>>      [1.29]	Don't your "license keys" allow people to pirate Executor?
>>	[1.30]	I want to bundle Executor on a CD-ROM.  Can I do that?

[2] Executor/DOS

	[2.1]  Which FTP sites will carry stable versions of the E/D demo?
	[2.2]  What are the hardware requirements for Executor/DOS?
	[2.3]  What do I do if my Super VGA card isn't VESA compliant?
	[2.4]  Executor crashes with "GrSetMode ; unknown adapter type
		 in driver."
	[2.5]  Does E/D require an ASPI driver to access SCSI?
	[2.6]  Have you released Executor for OS/2 yet?
	[2.7]  Why won't Executor/DOS work with my Diamond Viper PCI card?

[3] Executor/Linux

>>	[3.1]  Can I buy the Linux version now?
>>	[3.2]  Why can't the Linux version access floppies with option-shift-2
>>	[3.3]  Are we ready to hear about Executor/Linux bugs?
	[3.4]  Should bug reports be sent one at a time or in a big list?
>>	[3.5]  Why is there no Executor for NetBSD or FreeBSD?
>>	[3.6]  Where are the bitmaps stored on the Linux version of executor?
	[3.7]  Will there be an SVGALIB version of E/L in the future?
>>	[3.8]  Why do all the non-Executor Windows get creepy colors when
		Executor is running?
>>	[3.9]  How does printing work under Executor/Linux?
	[3.10] Why does Executor complain that it cannot find 'libXt.so.6'?

[4] Executor/NEXTSTEP

>>	[4.1]  Why hasn't there been an Executor/NEXTSTEP release in a while?


[1.1]  What is Executor?
------------------------

	Executor is a commercial emulator that allows non-Macintosh
	hardware to run some applications originally written on a
	Macintosh.  Executor has many limitations, see below.


[1.2]  On which platforms is Executor available?
------------------------------------------------

	Executor/DOS (E/D) is an implementation that runs under
	DOS and Windows.  Executor/NEXTSTEP (E/NS) is an implementation
	that runs under NEXTSTEP, both on original NeXT hardware
	and Intel based hardware running NEXTSTEP.  Executor/Linux
	is an implementation that runs under Linux, using X-Windows.


[1.3]  Who makes Executor?
--------------------------

	ARDI				questions@ardi.com
	Suite 4-101
	1650 University Blvd., NE
	Albuquerque, NM  87102

	+1 505 766 9115 Phone		+1 505 247 1899 FAX


[1.4]  Pronunciation?
---------------------

	Ig-zek'-yu-tor


[1.5]  Does Executor require you to obtain ROMs or System Files from Apple?
---------------------------------------------------------------------------

	No.  Executor reimplements from scratch the Macintosh
	Operating System and Toolbox.


[1.6]  How long has Executor been in development?
-------------------------------------------------

	Work began in September of 1986.


[1.7]  What techniques were used to rewrite the OS and Toolbox?
---------------------------------------------------------------

	Entirely clean-room techniques.  That is to say none of the
	Apple ROMs or Apple System File were ever disassembled.
	Instead ROMlib (the section of Executor that emulates the OS
	and Toolbox) was written from the manuals "Inside Macintosh",
	and Tech. notes.  That isn't sufficient to get the degree of
	compatibility that we need, so tests were written and run on
	Macs to see what a real Mac would do.  In addition, we run
	applications under Executor and when they deviate from how
	they would behave on a Mac, we take a look at what is going on
	and fix Executor accordingly.


[1.8]  What limitations does Executor have?
-------------------------------------------

	Because the OS and Toolbox have been rewritten from scratch,
	Executor has many limitations, including no AppleTalk, no
	sound, no System 7, no INITs, no CDEVs and no
	Internationalization.  Executor can read and write 1.4 Mb Mac
	formatted floppy disks, but can not format floppies, nor can
	it read or write 800 Kb floppy disks.

	E/NS can access the serial ports and can print, E/D and
	E/L can not.


[1.9]  Does Executor run all applications?
------------------------------------------

	Currently, no.  In addition to applications that won't run
	because they require something that we currently don't
	support (e.g.  System 7), due to our rewriting of the OS
	and Toolbox, there is room for enough incompatibility that
	many large programs do not work.  For this reason, we make
	demo versions of Executor available for potential customers
	to run before purchasing Executor (see below).

	We are in the process of cataloging what we have tested
	and will include that as appendix A.


[1.10]  What do the various Executor version numbers mean?
----------------------------------------------------------

	Any 1.x release other than 1.99 is a black and white release.
	Any release that ends in a lower case letter is technically an
	"experimental" release.  In general, experimental releases are
	pre-beta or beta releases that will eventually be released
	with a higher version number.

	The most recent non-experimental release of Executor/NEXTSTEP
	is version 1.3.  The most recent non-experimental release of
	Executor/DOS is 1.2.  There has not yet been a
	non-experimental release of Executor/Linux.

	Currently, with the recent addition of color support to
	Executor, Executor is experimental for all platforms.  We are
	trying to release new versions for all platforms in lockstep,
	so 1.99b has roughly the same feature set and bug set under
	DOS, Linux and NEXTSTEP.  Unfortunately, we haven't released
	a NEXTSTEP release in a while; see [4.1] for an explanation.


[1.11]  Where can I pick up the Executor demos?
-----------------------------------------------

	As long as they put up with us, the most up to date
	experimental versions of Executor can be found on
	ftp.cs.unm.edu in /pub/ardi.  However, ftp.cs.unm.edu does not
	have the bandwidth to accept many simultaneous users, so when
	we're happy with the stability of one of our color
	experimental versions, we'll make that version available on
	the traditional sites for commercial demos of the given
	platform.  See the platform specific answers for a list of
	these sites.

	We are currently working on setting up ftp.ardi.com and
	www.ardi.com, but they are not yet ready.

	We don't mind people making our current experimental versions
	available on other sites, but *please* be sure to include all
	the READMEs and FAQs which will allow users to find more
	current versions of Executor as they're released.


[1.12]  Is Executor shareware?
------------------------------

	No.  Executor is a commercial program available from ARDI.
	Unregistered demo versions are the only versions that should
	be found on bulletin boards or FTP sites.  If you find a
	non-limited version of Executor available to download, it was
	put there illegally.


[1.13]  How do the demo versions differ from the commercial versions?
---------------------------------------------------------------------

	Prior to Executor 1.99j, ARDI released two separate versions
	of each Executor/DOS and Executor/Linux release: a
	time-limited demo, and a full-fledged commercial version.
	NEXTSTEP versions could be "unlocked" by entering a serial
	number and registration key purchased from ARDI.

	See [1.28] for more information.

	The E/D, E/L and E/NS "locked" demos are time limited to ten
	minutes of use.  Once your ten minutes are up, you are thrown
	out, but you can restart the program again and run for another
	ten minutes if you'd like.


[1.14]  What's next?
--------------------

	Our immediate goal is to get Executor 2.0 out.  Back before
	1.99 was out, we had a set of goals for what would be in 2.0.
	We have had enough trouble implementing 32-bit color QuickDraw
	that we have had to pare some features out of what we had
	orginally proposed for the 2.0 feature set.  Features present
	in 2.0 are *still* subject to change, but our current plans
	are to add:

		A file browser -- we've written one in house.  We will
		be releasing it with source.

		Better documentation

		The ability to change the screen "depth" (number of colors
		that can be present at one time on the screen) and size
		on the fly.

		A simpler method for installing fonts and Desk Accessories

		A better set of demo and utility programs

	We also have a set of general and platform specific bugs that
	we need to have fixed before we can freeze 2.0.

	Beyond 2.0, we want to make Executor compatible with Apple's
	System 7.5, so you'll be able to purchase a copy of System
	7.5, install it on top of Executor and get even more
	compatibility and features.


[1.15]  When will 2.0 be out?
-----------------------------

	The answer here is embarrassing.  Our original target was
	summer of 1994.  With the experimental releases coming out
	regularly, there is a light at the end of the tunnel, but we
	can't say exactly when it will be.  We had some
	miscommunication with our investors that prevented us from
	working very efficiently in the spring, summer and fall of
	1994.  It looks like we've got that cleaned up now.


[1.16]  How can I get in ARDI's beta program?
---------------------------------------------
	
	Our beta program is really boring.  The only thing that you
	get that you can't get over the net is an actual set of
	floppies that contain installation scripts.  As such, we
	really don't need new beta members.  Just pick up the
	experimental versions and keep us informed.

	
[1.17]  Does Executor have networking support?
----------------------------------------------

	Currently, no.  Nor, will it be available in Executor 2.0.
	Networking support is planned for release 3.0, but we do not
	yet have an estimated date of completion for 3.0.  The first
	platform to have networking support built in will probably be
	Linux.


[1.18]  How do you install Fonts and Desk Accessories (DAs)?
------------------------------------------------------------

	The short answer is "wait for our new file browser that will
	allow you to install fonts and DAs via drag and drop."
	However, if you are an old time Macintosh user and you have a
	copy of Font/DA Mover on a Mac, you can copy the Executor
	System file over to a Mac, install the Fonts/DAs over there
	and then bring the System file back to Executor.  This is
	tricky and not for the faint of heart.


[1.19]  Will Desk Accessories work under Executor?
--------------------------------------------------

	Currently Desk Accessory support is very weak; most will not
	run.  After we get the browser released that allows easy
	installation and removal of desk accessories, we'll spruce up
	our DA code and work on insuring that some of the more popular
	DAs work.


[1.20]  Does E/D run xxx?
-------------------------

	With all the rush to get 2.0 out the door ASAP, we're
	putting our testing people to work testing new experimental
	versions, instead of testing 1.2.  There is plenty that
	1.2 will not run, and as such, we recommend people try out
	the demo before purchasing Executor.

	We will be making a list of what runs and what doesn't available
	as part of this document as Appendix A, but that information is
	not available in this release of the FAQ.


[1.21]  What's the best way to keep informed about Executor?
------------------------------------------------------------

	Join the Executor mailing list.  Send a message to
	"executor-request@nacm.com".  Make sure your subject line is blank
	and your message body says:

	subscribe

	We try to post important events to the net, and send new
	release information via U.S. mail to our current customers,
	but the Executor mailing list is where we post news about our
	experimental versions and where you can send mail to talk with
	other people who are using Executor.

	If you'd rather get the Executor Interest information in a
	daily digest form, send the same subscribe message to
	"executor-digest-request@nacm.com", instead of
	"executor-request@nacm.com".

	To remove yourself from either mailing list, send a message to
	the address that you used to subscribe, saying:

	unsubscribe

	This will work only if you send the unsubscribe message from
	the same account that you used to send the subscribe message.
	You can also send a message of "help" to executor-request and more
	information about how to use it will be e-mailed to you.  If
	you are still having trouble, you can send e-mail to
	"majordomo-owner@nacm.com" and that will be processed by a
	person, although it may take a few days for the person to get
	around to to your request.

	Even after you have unsubscribed to the list, you will
	continue to get any messages that were posted to the list
	before you unsubscribed but were not actually sent
	immediately, but once you have unsubscribed, any new messages
	that come in will not be sent to you.

	The Executor Interest mailing list is administered by a
	volunteer.  We do not directly control the list.  Lately there
	has been a request that we operate a mailing list for
	announcements only.  Although we can't provide that right now,
	we're hoping the digestification will make such a separate
	list much less needed.


[1.22]  Why shouldn't I send e-mail to ctm@ardi.com?
----------------------------------------------------

	Cliff gets tons of e-mail.  E-mail sent to questions@ardi.com
	is answered much more punctually.


[1.23]  What is an ".hfv" file?
-------------------------------

	Executor has the ability to store an entire Macintosh "volume"
	(i.e. filesystem corresponding to a disk drive or a partition
	within a disk drive) in a DOS or UNIX file.  Under DOS, this
	feature is very handy because there is no way to have files
	with long names and upper and lower case characters in their
	names unless you use a ".hfv" file.


[1.24]  Can I launch apps directly from the command line?
---------------------------------------------------------

	Yes.  If an app resides within a UNIX or DOS filesystem, you
	can specify the name of the app, and documents that you would
	like the app to open when it starts up, on the command line.

	Apps that reside in ".hfv" files can't currently be launched
	from the command line.  This will change soon.


[1.25]  What are all the command line switches?
-----------------------------------------------

	NOTE:  we are currently in the process of revamping how executor
		processes command line switches.  This should allow
		us to have much less confusing documentation.
	       

	Switch      Min     Max     Default         Default when switch
                                                    is present, but with no
                                                    value specified

	bpp         1       8       8               8
	refresh     0       60      0               10
	shadow      0       1       0               1

	nosplash    0       1       0               1
	debug       0       10      0               10

	noclock     0       1       0               1
	noint8      0       1       0               1

	drivecheck  0       1       0               1

	nomouse     0       1       0               1

	applzone    128     8192    1024            2048
	syszone     128     4096    512             1024
	stack       64      4096    256             128

	size        512x342 varies  640x480         illegal

	nativecode  0       1       1               1

	Additional Linux/X windows options
	----------------------------------
	privatecmap
	invertedcursorbug
	geometry
	synchronous

	The switches bpp, refresh and shadow all affect how the screen
	is emulated.  The number of bits per pixel that the program
	running under Executor sees is specified by bpp.  If bpp is
	set to 1, then there are only two "colors" (black and white)
	available.  If it is set to 8, then 256 colors are available.
	For Executor/DOS, you need a SVGA board with a VESA compatible
	driver to get 8 bits per pixel and screen sizes larger
	than 640x480.

	When Executor first starts up, a "splash screen" is printed.
	You can omit this splash screen with the nosplash switch.

	Sometimes Executor detects potential errors that may be useful
	for us to see when we try to figure out why a given program
	won't run under Executor the debug option controls the
	printing of these error messages.

	One of the hardest things to emulate properly is the internal
	timing mechanisms of a Macintosh.  Sometimes it is desirable
	to turn off our clock emulation.  Both noclock and noint8 do
	this, although in slightly different ways.

	When Executor displays a standard "get" or "put" dialog box,
	there is a button marked "drive" that allows you to cycle
	through the Macintosh volumes that Executor knows about.  You
	can use the drivecheck switch to have Executor examine your
	DOS drives each time you click the "drive" button.  In
	general, this is more annoying than it is useful.

	Although Executor is almost totally useless without a mouse,
	Executor/DOS can be started without a mouse if you use the
	nomouse switch.  If you don't use that switch and you don't
	have a mouse, Executor/DOS will politely tell you that you
	can't run Executor.

	The switches applzone, syszone and stack control how much
	memory is allocated to the application, the system, and the
	application stack.  In general, if you have more memory,
	you should override the default applzone and allow Executor
	to use more memory.

	For X windows users, privatecmap specifies that Executor
	should use a private colormap.  This is the fastest graphics
	mode and gives you the most accurate colors, but at the
	expense of radically changed colors in your other windows
	whenever the cursor is in the Executor window, and radically
	changed colors in the Executor window whenever the cursor is
	outside of it.  Because this is annoying, this mode is not the
	default. When not in this mode, the pixels in Executor's
	internal frame buffer are converted to the nearest X colors
	before being drawn to the screen.

	Executor 1.99<x> uses a new "synthetic CPU" which is much
	faster than the synthetic CPU in previous releases of
	Executor.  The speed increase is due to our use of native
	code; Executor now translates the 68k code being emulated into
	80x86 code "on the fly" and runs the 80x86 code.  However,
	like anything that is new, there's a chance that our
	improvement has some hidden drawbacks.  You can turn off the
	use of native code by specifying nativecode 0.

	Here is an example of some of those switches:

		executor -applzone 4096 -noclock -nativecode 0

	That would allocate 4 Mb of memory for the applications use,
	turn off our clock emulation and revert to a slower type of
	68LC040 emulation -- an unlikely combination of switches.


[1.26]  Can I have Executor use more than 8Mb for the application zone?
-----------------------------------------------------------------------

	Currently, no.  We are reorganizing our memory layout to allow
	you to do this in the future.


[1.27]	An app I'm trying crashes.  What should I do?
-----------------------------------------------------

	Perhaps the most common avoidable cause of crashes is
	insufficient memory for the emulated application.  You can fix
	this by increasing the "applzone" parameter.  For example,
	many programs which normally die quickly will work with
	"executor -applzone 4096" (which allocates 4Mb of space for
	the emulated application; see the list of command line
	switches and their meanings elsewhere in this document).

	Some programs are unhappy when they discover that Executor
	does not provide sound support, and crash.  You can turn on
	the "pretend sound" option before running the application in
	question and see if this helps.

	The "noclock" switch has also been known to help.


[1.28]  How do Executor's "license keys" work?
-------------------------------------------

	We have now added this "unlocking" capability to the DOS and
	Linux versions.  NEXTSTEP versions have always had license
	keys.  Now any Executor owner can pick up the latest Executor
	release from the Internet, "unlock" it with his serial number
	and registration key, and take advantage of the latest
	features and bug fixes.  This does not mean that all future
	upgrades will be available for free in this mode, but we
	intend to make "minor" upgrades free.

	The "unlocking" process actually modifies your copy of
	Executor, stamping *your* serial number into it permanently.
	For this reason, once you have registered a copy of Executor,
	you may not redistribute it, nor should you leave it on an
	unprotected machine, where someone may illegally copy it.


[1.29]	Don't your "license keys" allow people to pirate Executor?
------------------------------------------------------------------

	No.  If the proper license fee has not been paid to ARDI, then
	the use of a fully registered copy of Executor is illegal, no
	matter how it was acquired.  It is true that since license
	serial number, authorization key pairs are small bits of text,
	it is easier to disseminate unauthorized serial key pairs than
	it is to disseminate unauthorized Executor binaries, but
	that's beside the point.

	We decided to use serial numbers and authorization keys as a
	convenience to our customers, especially while we're still
	pressing toward the release of 2.0 and each new experimental
	copy is (usually!) much better than the one that preceeded it.
	We prefer prosecuting the pirates to punishing our patrons.

	Our demo mode allows the honest person to evaluate our product
	before making the decision to purchase it and become a
	customer.  The use of an authorization key allows our
	customers to automatically participate in our beta and even
	pre-beta testing.  This leads to faster development cycles and
	a better product.

	
[1.30]	I want to bundle Executor on a CD-ROM.  Can I do that?

	The short answer is "yes".

	You are able to freely copy and distribute demo versions of
	Executor, as long as you follow the restrictions set forth in
	Executor's license panel:

	  Complete, unregistered distributions of Executor may be
	  copied and redistributed as long as all copies are
	  unmodified and contain all of the original files in their
	  entirety.  Once it is registered, Executor may be copied
	  only for backup purposes.  Licensee may not modify or create
	  derivative works based on Executor or any part thereof.

	A suggestion: contact us to make sure you have the latest
	version of Executor.  We can also tell you if a new release is
	imminent.
	

[2]  Executor/DOS
=================

[2.1]  Which FTP sites will carry stable versions of the Executor/DOS demo?
---------------------------------------------------------------------------

	Currently the most recent "stable" version of Executor/DOS is
	1.2.  That version is black and white, doesn't run as much
	software as 1.99j does, and is much slower.

	E/D is available from the SimTel mirrors.  The primary
	SimTel mirror is oak.oakland.edu, and you can find the
	Executor/DOS demo within the "SimTel/msdos/emulator"
	directory.  It comes in four pieces: exctr12?.zip where ?
	represents the letters a,b,c and d.

        Other SimTel mirrors are:

         St. Louis, MO:  wuarchive.wustl.edu (128.252.135.4)
                         /systems/ibmpc/msdos
         Corvallis, OR:  archive.orst.edu (128.193.2.13)
                         /pub/mirrors/simtel/msdos
         Australia:  archie.au (139.130.4.6)
                         /micros/pc/oak
           England:  src.doc.ic.ac.uk (146.169.2.10)
                         /pub/packages/simtel
           Finland:  ftp.funet.fi (128.214.248.6)
                         /pub/msdos/SimTel
            France:  ftp.ibp.fr (132.227.60.2)
                         /pub/msdos
           Germany:  ftp.uni-paderborn.de (131.234.2.32)
                         /SimTel/msdos
         Hong Kong:  ftp.cs.cuhk.hk (137.189.4.57)
                         /pub/simtel/msdos
            Israel:  ftp.technion.ac.il (132.68.1.10)
                         /pub/unsupported/dos/simtel
            Poland:  ftp.cyf-kr.edu.pl (149.156.1.8)
                         /pub/mirror/msdos
            Sweden:  ftp.sunet.se (130.238.127.3)
                         /pub/pc/mirror/SimTel/msdos
        Switzerland:  ftp.switch.ch (130.59.1.40)
                         /mirror/msdos
            Taiwan:  NCTUCCCA.edu.tw (140.111.1.10)
                         /PC/simtel
          Thailand:  ftp.nectec.or.th (192.150.251.32)
                         /pub/mirrors/msdos

	If you have AFS, you can pick up Executor/DOS demo 1.2 by
	changing directories to
	/afs/umich.edu/group/itd/archive/msdos/emulators/macintosh.


[2.2]  What are the hardware requirements for Executor/DOS?
-----------------------------------------------------------

	For Executor/DOS 1.2 you need a '386 or better, VGA, 7 Mb disk
	space, a 3.5" 1.44 Mb floppy drive, and 4 Mb RAM.  A SCSI
	Controller is needed only if you want to access external
	Macintosh hard disks or PowerBooks.

	Executor/DOS 1.99<x> should work in sixteen colors on any VGA,
	although we do not have the facilities to test more than a few
	in house.  In addition, if you have a Super VGA that is "VESA
	compliant", Executor/DOS should be able to provide 256 colors
	and a range of screen sizes.


[2.3]  What do I do if my Super VGA card isn't VESA compliant?
--------------------------------------------------------------

	There is a shareware SVGA utility that provides VESA compliance
	for SVGA cards that normally are not VESA compliant.  At the time
	this FAQ was last modified, univbe50.zip was the most recent
	release of this extender.

	It is not a product of ARDI, but as a convenience to people
	picking up experimental versions of Executor, the file
	univbe50.zip is available in
	ftp.cs.unm.edu:/pub/ardi/Executor_DOS.  If you use it, you
	should pay the shareware fee as described in the documentation
	included in the zip file.  If you have a recent SVGA card you
	probably don't need univbe.  There may be a more recent
	version of univbe in oak.oakland.edu:/SimTel/msdos/graphics.
	This directory also has several other card specific VESA
	drivers, some of which can be found in vesa-tsr.zip and
	vesadrv2.zip.


[2.4]  Executor crashes with "GrSetMode ; unknown adapter type in driver."
--------------------------------------------------------------------------

	You must be running an old version of Executor; this error
	cannot occur in versions >= 1.99h.

	1.99b had problems when Microsoft's display.sys driver is in
	config.sys.  We have updated the code that had this problem
	and hope that the problem is now fixed.  If it is not, you
	must remove display.sys from the config.sys section you use
	when you're using Executor/DOS.  Please report this bug if you
	see it in E/D 1.99e or later.


[2.5]  Does E/D require an ASPI driver to access SCSI?
------------------------------------------------------

	If your SCSI drivers patch the "INT 13" BIOS calls, then an
	ASPI driver is not needed.  As long as "INT 13" can allow Executor
	to read a SCSI drive, there is no need to use ASPI.


[2.6]  Have you released Executor for OS/2 yet?
-----------------------------------------------

	We plan on making an OS/2 specific version of Executor, but only
	after we get Executor 2.0 shipping


[2.7]  Why won't Executor/DOS work with my Diamond Viper PCI card?
------------------------------------------------------------------

	Executor/DOS requires VESA compliant graphics cards.  Many
	cards are not directly VESA compliant and need a tsr to be run
	before they will work with Executor/DOS.  On a Gateway
	computer, you can do this with the "vprmode VESA" command.


[3]  Executor/Linux
===================

[3.1]  Can I buy the Linux version now?
---------------------------------------

	(Technically, our software is licensed, not sold) You can now
	license Executor/Linux and be provided with a serial number
	and license key from ARDI and "unlock" the experimental
	Executor 1.99<x> releases as well as Executor/Linux 2.0.*.
	However, currently there is no printed manual available for
	Executor/Linux.


[3.2]  Why can't the Linux version access floppies with option-shift-2
----------------------------------------------------------------------
		(like  the DOS version does)?
		-----------------------------

	This problem was fixed in Executor/Linux 1.99j.


[3.3]  Are we ready to hear about Executor/Linux bugs?
------------------------------------------------------

	Yes.  Send them to "bugs@ardi.com" and make sure that you
	identify what version of Executor you're running (i.e.
	Executor/Linux 1.99b) as well as what kernel and X-Windows
	you're using.  Please mention what Mac software you were
	running when you encountered the bug and explain whether the
	bug is reproducible or not.  If Executor provides some sort of
	debug output, please include that as well.  Our NEXTSTEP
	version has a bug-sending facility that automatically fills in
	all that information for you.  If we get some time, we'll
	incorporate that code into Executor/Linux.

	Executor 1.99j is bundled with a "send-pr" package that allows
	you to submit bug reports directly into our "gnats" bug
	tracking database.  We prefer that you use this tool, although
	it's not necessary.  See [3.4] for more information.


[3.4]  Should bug reports be sent one at a time or in a big list?
-----------------------------------------------------------------

	In general, it's easier for *us* if you send them one at a
	time.  Internally we use "gnats", a free bug-tracking tool and
	we need to separate each bug into a single file for tracking.
	On the other hand, since by providing us with bug reports
	you're helping us out, we won't refuse bug reports that are
	collections.

	In fact, if you're particularly brave, you can pick up the
	file "send-pr.tar.gz" and install a program "send-pr" which
	will allow you to send us bug reports pre-formatted for gnats.
	This will save us time and also give you a bug tracking number
	that you can refer to in further e-mail to ARDI about the bug.


[3.5]  Why is there no Executor for NetBSD or FreeBSD?
------------------------------------------------------

	We don't currently have the manpower to support it.  The Linux
	release is a byproduct of the fact that we use Linux in house.
	After we've cleaned up the Linux version and get some
	Executor/Linux sales, we'll look into the feasibility of Executor
	for NetBSD and FreeBSD.


[3.6]  Where are the bitmaps stored on the Linux version of executor?
---------------------------------------------------------------------

	All versions of executor maintain an internal bitmap
	corresponding to the actual screen.  We accrue a "dirty rect"
	as the program draws to what it thinks is the screen via
	Executor's QuickDraw implementation.  We periodically update
	the _real_ screen (e.g., the X window) by transferring the
	"dirty rect" across.  So basically our graphics interface to
	the host machine consists of nothing more than blitting
	rectangles to the screen, which aids our portability.  Under
	X, we use shared memory extensions for speed, but we don't do
	anything fancy like trying to cache Mac fonts on the X server
	side.  Spending time trying to do so would be a bad idea for a
	number of reasons I won't go into.

	"Refresh" mode is useful when the program directly manipulates
	the frame buffer itself.  In this mode, we periodically
	analyze the internal screen memory to decide what has been
	changed, and transfer the changed data to the real screen.


[3.7]  Will there be an SVGALIB version of Executor/Linux in the future?
------------------------------------------------------------------------

	Probably.  Executor/Linux would clearly get a major
	performance benefit from an SVGALIB implementation.  We are in
	the process of rewriting our graphics and event handling code
	so that it will be easy to add this sort of capability, but we
	don't yet have a timetable for doing so.


[3.8]  Why do all the non-Executor Windows get creepy colors when Executor
--------------------------------------------------------------------------
		is running?
		-----------

	This is no longer true for recent versions of Executor.
	Executor/Linux can run in two modes on 4- or 8-bit X servers.

	  1) "private colormap" mode.  In this mode, Executor "takes
	     over" all colors on your screen when the cursor is in the
	     Executor window.  That means that the colors for all your
	     other windows will suddenly change radically.  This is
	     the fastest mode, and provides the most accurate colors,
	     but it can be a real eyesore.  Still, if you're playing
	     Wolfenstein 3D or some other interactive game, you may
	     want to maximize performance by using this mode.  You can
	     enable this mode with "-privatecmap".
	  2) "non-private colormap" mode.  In this mode (the default),
	     Executor coexists nicely with other X windows by not
	     mucking about with the colors they use.  This mode loses
	     some accuracy and speed, because Executor cannot set the
	     entire color table to exactly what it wants and it must
	     convert its internal graphics representation to one
	     appropriate for the X screen whenever it updates your
	     display.  We have carefully optimized this conversion
	     process, so you won't notice the performance penalty most
	     of the time.

	The "-privatecmap" flag is irrelevant to 16, 24, and 32-bit X
	servers, since they don't have a color table.


[3.9]  How does printing work under Executor/Linux?
---------------------------------------------------

	Executor expects to print to a PostScript printer, or to send
	output to a PostScript compatible filter, like GhostScript.
	When an applicaton prints under Executor, a PostScript stream
	will be created and sent through the program "executor_filter"
	which you can create by hand to "do the right thing", or "lpr"
	if there is no "executor_filter" for Executor to run.

	On our systems, "lpr" automatically does the right thing, so
	other than occasionally setting our "PRINTER" environment variable,
	we don't have to do much to print from Executor.

	If you need to write your own filter, you can test it by typing:

		./myfilter < myfile.ps

	where "myfile.ps" is some PostScript file you have lying
	around.  The "<" is VERY important!  Executor does NOT give
	your filter any command line arguments; it just "pipes" the
	PostScript file through it.

	CAVEAT #1:  The output that is currently produces relies on some
	"Encoding" changes that appear not to work with GhostScript.  As
	such, certain characters are improperly mapped.  Word output for
	example can not print apostrophes!  Yes, we know this is very bad
	and are looking for a remedy.

	CAVEAT #2:  Different apps running under Executor have different
	levels of success when printing.  As always, *especially* with the
	experimental versions, try first to make sure Executor will do what
	you want it to.


[3.10] Why does Executor complain that it cannot find 'libXt.so.6'?
-------------------------------------------------------------------

	If Executor complains as soon as you start it up, you are either
	running an old version of Executor (prior to 1.99e, at least) or
	you are running XFree86 2.x instead of XFree86 3.x.  Currently we
	do not have the time to create two separate versions of E/L, so
	use the "current" XFree86 server/libraries.

	It has been reported that you can install the XFree86 3.x shared
	libraries and still use an XFree86 2.x server.  We have not
	verified such trickery here at ARDI -- you're on your own.

	When E/L 2.0 is released, we'll reevaluate our "3.x" only policy
	and if there are a significant number of XFree86 2.x users that
	would like to run E/L, we'll consider offering a version that links
	with the XFree86 2.x libraries.


[4]  Executor/NEXTSTEP
======================

[4.1]  Why hasn't there been an Executor/NEXTSTEP release in a while?
---------------------------------------------------------------------

	Recently we've revamped how Executor handles graphics
	internally.  This broke our NEXTSTEP support, so we have not
	released a NEXTSTEP version in a while.  Since we have to
	rewrite that part of Executor anyway, we are looking into some
	NeXT tools that allow programs to implement very fast
	graphics.  Before we can use these tools, we need some
	information from NeXT which thus far has not been forthcoming.
	Once we have that information, we will resume making NEXTSTEP
	releases in lockstep with releases for other platforms.
