; ; Hewlett-Packard EtherTwist PC LAN Adapter NC/16 TP ; Configuration file version 1.00 ; !HWP18C0.CFG 03-15-1993 ; ; (C)Copyright Hewlett-Packard Co., 1992-1993 ; All Rights Reserved. ; HP grants Intel the right to copy and distribute this file ; in the ICU database on 10/21/93. BOARD ID = "HWP18C0" NAME = "HP EtherTwist PC LAN Adapter NC/16 TP (J2405A)" MFR = "Hewlett-Packard Co." CATEGORY = "NET" SLOT = ISA16 LENGTH = 165 AMPERAGE = 500 BUSMASTER = 40 COMMENTS = "The HP PC LAN Adapter NC/16 TP is a 16-bit Type 10Base-T compatible local area networking board.\n\n Your board configuration parameters of I/O Address range, DMA Channel, Interrupt Channel (IRQ) may be chosen using this EISA configuration utility to match the requirements of your computer. Your board also must be set to match the values selected using the program HPNCSET.EXE which is on the board's Support Disk." SOFTWARE(1) = " The following configuration parameters have been selected for the HP PC LAN Adapter NC/16 TP. The program HPNCSET.EXE must be used to configure your board to match these values. Your network software also may ask you for this data:\n" FUNCTION = "HP PC LAN Adapter NC/16 TP (J2405A)" TYPE = "NET" CONNECTION = "One RJ-45 8-pin LAN connector" SUBFUNCTION="I/O Address Range" CHOICE = "300h - 317h (Factory default)" LINK PORT = 300h - 317h INIT = SOFTWARE(1) "I/O Range: 300h-317h" CHOICE = "320h - 337h" LINK PORT = 320h - 337h INIT = SOFTWARE(1) "I/O Range: 320h-337h" CHOICE = "340h - 357h" LINK PORT = 340h - 357h INIT = SOFTWARE(1) "I/O Range: 340h-357h" CHOICE = "360h - 377h" LINK PORT = 360h - 377h INIT = SOFTWARE(1) "I/O Range: 360h-377h" SUBFUNCTION = "DMA Channel" CHOICE = "5 (Factory default)" LINK DMA = 5 INIT = Software(1) "DMA = 5" CHOICE = "3" LINK DMA = 3 INIT = Software(1) "DMA = 3" CHOICE = "6" LINK DMA = 6 INIT = Software(1) "DMA = 6" CHOICE = "7" LINK DMA = 7 INIT = Software(1) "DMA = 7" SUBFUNCTION = "Interrupt Channel (IRQ)" CHOICE = "3 (Factory default)" LINK IRQ = 3 INIT = Software(1) "IRQ = 3" CHOICE = "4" LINK IRQ = 4 INIT = Software(1) "IRQ = 4" CHOICE = "5" LINK IRQ = 5 INIT = Software(1) "IRQ = 5" CHOICE = "9" LINK IRQ = 9 INIT = Software(1) "IRQ = 9" CHOICE = "10" LINK IRQ = 10 INIT = Software(1) "IRQ = 10" CHOICE = "11" LINK IRQ = 11 INIT = Software(1) "IRQ = 11" CHOICE = "12" LINK IRQ = 12 INIT = Software(1) "IRQ = 12" CHOICE = "15" LINK IRQ = 15 INIT = Software(1) "IRQ = 15"