; === ACCTON TECHNOLOGY CORPARATION ===
;
; Configuration file name : !ACC120A.CFG
; For ACCTON EtherCombo-32 Adapter EN1200R02 (short card)   11/02/1993

BOARD
   ID = "ACC120A"
   NAME = "ACCTON EtherCombo-32 Ethernet Adapter"
   MFR = "ACCTON TECHNOLOGY CORPORATION"
   CATEGORY = "NET"
   SLOT = EISA
   LENGTH = 165
   READID = YES
   BUSMASTER = 23
   AMPERAGE = 1000
   IOCHECK = INVALID
   DISABLE = SUPPORTED
   COMMENTS = " The EtherCombo-32 is a 32 bit EISA bus master adapter
		based on SONIC Ethernet controller."
   HELP = "ACCTON EtherCombo-32 Adapter\n
	   This configuration file allows selection of the following:\n
	   1. BOOT ROM disable/enable\n
	   2. Interrupt trigger type/channel\n
	   3. Physical media selection"

IOPORT(1) = 0zc88h
   SIZE = WORD
   INITVAL = 0000xxx1010x0xxx
				;slave size=16, master size=32
				;interrupt unlatched, Preempt time=23 BCLKs
;IOPORT(b2) = 0zc89h
;   INITVAL = 0000xxx1		 ;Slot-Specific, receive own packets
IOPORT(2) = 0zc8Ah
IOPORT(3) = 0zc8Fh
   INITVAL = 00xxx0x0		;burst read/write is disable


FUNCTION = " Ethernet BOOT ROM start address"
      CHOICE = "BOOT ROM Disabled "
	FREE
	  INIT = IOPORT(2) LOC(7-6) 00

      CHOICE = "BOOT ROM 27128 (16K x 8)"
	FREE
	  INIT = IOPORT(2) LOC(7-6) 10
	LINK
	  MEMORY = 16K
	  ADDRESS = 0C0000H-0DC000H step=16K
	  WRITABLE = NO
	  MEMTYPE = OTHER
	  SIZE = BYTE
	  DECODE = 24
	  CACHE = YES
	  INIT = IOPORT(2) LOC(5-3) 000|001|010|011|100|101|110|111


FUNCTION = "EtherCombo-32 Interrupt Trigger Type/Channel"

    CHOICE = "Edge Triggered Interrupt"
	LINK
	  IRQ = 3|5|7|9|10|11|12|15
	  TRIGGER = EDGE
	  SHARE = NO
	  INIT = IOPORT(1) LOC(10 2 1 0) 0011|0101|0111|0001|1001|1011|1101|1111

    CHOICE = "Level Triggered Interrupt"
	LINK
	  IRQ = 3|5|7|9|10|11|12|15
	  TRIGGER = LEVEL
	  SHARE = YES
	  INIT = IOPORT(1) LOC(10 2 1 0) 0010|0100|0110|0000|1000|1010|1100|1110


FUNCTION = "Physical Media"
      CHOICE = "Coaxial cable (Thin Ethernet)"
	FREE
	INIT = IOPORT(1) LOC(11 9) 11

      CHOICE = "UTP cable"
	FREE
	INIT = IOPORT(1) LOC(11 9) 00

      CHOICE = "Drop Cable (AUI Cable)"
	FREE
	INIT = IOPORT(1) LOC(11 9) 10