;  SK-NET FDDI-<x>E  EISA 32-Bit FDDI LAN Adapter
;
;  (C)Copyright Schneider & Koch & Co.  Datensysteme GmbH 1992, 1994
;
;
;  03/92 Version 1.0
;  3/1/94 Version 1.1  WF
;  Function -> Subfunction (Windows NT)
;

BOARD
   ID = "SKD0100"
   NAME = "SK-NET FDDI-FE EISA 32-Bit FDDI LAN Adapter"
   MFR = "Schneider & Koch & Co."
   CATEGORY = "NET"
   SLOT = EISA
   LENGTH = 275
;   AMPERAGE = xxxxmA
   IOCHECK = INVALID                    ; IOCHKERR bit not supported
   READID = YES                         ; readable Product ID
   DISABLE = SUPPORTED                  ; usage of ENABLE bit

;   COMMENTS = "


IOPORT(1) = 0zCA0h                      ; configuration register part 1
   INITVAL= 00xxxxxx                    ; 12 Volt disabled

IOPORT(2) = 0zCA4h                      ; configuration register part 2
   INITVAL= 0000xxxx                    ; FRPOM page = 0

IOPORT(3) = 0zC84h                      ; configuration register part 3
   INITVAL= 0000000x

FUNCTION = "SK-NET FDDI-<x>E"           ; <x> = F :: multimode Fiber
     TYPE = "NET,FDDI"


SUBFUNCTION = "DMA channel selection"
    CHOICE = "DMA channel 7"
	LINK
	    DMA = 7
		SHARE = NO
		SIZE = BYTE
		TIMING = TYPEC
	    INIT =  IOPORT(1) LOC(4 3) 11
    CHOICE = "DMA channel 6"
	LINK
	    DMA = 6
		SIZE = BYTE
		TIMING = TYPEC
	    INIT = IOPORT(1) LOC(4 3) 10
    CHOICE = "DMA channel 5"
	LINK
	    DMA = 5
		SIZE = BYTE
		TIMING = TYPEC
	    INIT = IOPORT(1) LOC(4 3) 01
    CHOICE = "DMA channel 0"
	LINK
	    DMA = 0
		SIZE = BYTE
		TIMING = TYPEC
	    INIT = IOPORT(1) LOC(4 3) 00

SUBFUNCTION = "INTERRUPT SELECT"
    CHOICE = "INTERRUPT 11    edge  triggered"
	FREE
	    IRQ = 11
		SHARE  = NO
		TRIGGER = EDGE
		INIT = IOPORT(1) LOC(1 0) 11
		INIT = IOPORT(1) LOC(2) 0
    CHOICE = "INTERRUPT 11    level triggered"
	FREE
	    IRQ = 11
		SHARE  = NO
		TRIGGER = LEVEL
		INIT = IOPORT(1) LOC(1 0) 11
		INIT = IOPORT(1) LOC(2) 1
		
    CHOICE = "INTERRUPT 10    edge  triggered"
	FREE
	    IRQ = 10
		SHARE = NO
		TRIGGER = EDGE
		INIT = IOPORT(1) LOC(1 0) 10
		INIT = IOPORT(1) LOC(2) 0
    CHOICE = "INTERRUPT 10    level triggered"
	FREE
	    IRQ = 10
		SHARE = NO
		TRIGGER = LEVEL
		INIT = IOPORT(1) LOC(1 0) 10
		INIT = IOPORT(1) LOC(2) 1
		
    CHOICE = "INTERRUPT 9     edge  triggered"
	FREE
	    IRQ = 9
		SHARE  = NO
		TRIGGER = EDGE
		INIT = IOPORT(1) LOC(1 0) 01
		INIT = IOPORT(1) LOC(2) 0
    CHOICE = "INTERRUPT 9     level triggered"
	FREE
	    IRQ = 9
		SHARE  = NO
		TRIGGER = LEVEL
		INIT = IOPORT(1) LOC(1 0) 01
		INIT = IOPORT(1) LOC(2) 1
		
    CHOICE = "INTERRUPT 5     edge  triggered"
	FREE
	    IRQ = 5
		SHARE = NO
		TRIGGER = EDGE
		INIT = IOPORT(1) LOC(1 0) 00
		INIT = IOPORT(1) LOC(2) 0       ; EDGE TRIGGERED
    CHOICE = "INTERRUPT 5     level triggered"
	FREE
	    IRQ = 5
		SHARE = NO
		TRIGGER = LEVEL
		INIT = IOPORT(1) LOC(1 0) 00
		INIT = IOPORT(1) LOC(2) 1
SUBFUNCTION = "Shared ROM and Boot PROM enable"
	CHOICE = "Disable FLASH MEMORY (FPROM)"
	LINK
	    INIT = IOPORT (2) LOC (3-0) 1111
	    INIT = IOPORT (1) LOC (5) 1
				
	CHOICE = "Enable  FPROM              8K ROM @ DC000h"
	LINK
	    MEMORY = 8K
		    ADDRESS = 00DC000h
		    WRITABLE = NO
		    MEMTYPE = OTH
		    SIZE = BYTE
		    CACHE = NO
		    INIT = IOPORT(2) LOC(3-0) 1110
		    INIT = IOPORT(1) LOC(5) 1
			
	CHOICE = "Enable  FPROM              8K ROM @ DA000h"
	LINK
	    MEMORY = 8K
		    ADDRESS = 00DA000h
		    WRITABLE = NO
		    MEMTYPE = OTH
		    SIZE = BYTE
		    CACHE = NO
		    INIT = IOPORT(2) LOC(3-0) 1101
		    INIT = IOPORT(1) LOC(5) 1

	CHOICE = "Enable  FPROM              8K ROM @ D8000h"
	LINK
	    MEMORY = 8K
		    ADDRESS = 00D8000h
		    WRITABLE = NO
		    MEMTYPE = OTH
		    SIZE = BYTE
		    CACHE = NO
		    INIT = IOPORT(2) LOC(3-0) 1100
		    INIT = IOPORT(1) LOC(5) 1
		
	CHOICE = "Enable  FPROM              8K ROM @ D6000h"
	LINK
	     MEMORY = 8K
		    ADDRESS = 00D6000h
		    WRITABLE = NO
		    MEMTYPE = OTH
		    SIZE = BYTE
		    CACHE = NO
		    INIT = IOPORT(2) LOC(3-0) 1011
		    INIT = IOPORT(1) LOC(5) 1

	CHOICE = "Enable  FPROM              8K ROM @ D4000h"
	LINK
	     MEMORY = 8K
		    ADDRESS = 00D4000h
		    WRITABLE = NO
		    MEMTYPE = OTH
		    SIZE = BYTE
		    CACHE = NO
		    INIT = IOPORT(2) LOC(3-0) 1010
		    INIT = IOPORT(1) LOC(5) 1

	CHOICE = "Enable  FPROM              8K ROM @ D2000h"
	LINK
	     MEMORY = 8K
		    ADDRESS = 00D2000h
		    WRITABLE = NO
		    MEMTYPE = OTH
		    SIZE = BYTE
		    CACHE = NO
		    INIT = IOPORT(2) LOC(3-0) 1001
		    INIT = IOPORT(1) LOC(5) 1

	CHOICE = "Enable  FPROM              8K ROM @ D0000h"
	LINK
	     MEMORY = 8K
		    ADDRESS = 00D0000h
		    WRITABLE = NO
		    MEMTYPE = OTH
		    SIZE = BYTE
		    CACHE = NO
		    INIT = IOPORT(2) LOC(3-0) 1000
		    INIT = IOPORT(1) LOC(5) 1

	CHOICE = "Enable  FPROM              8K ROM @ CE000h"
	LINK
	     MEMORY = 8K
		    ADDRESS = 00CE000h
		    WRITABLE = NO
		    MEMTYPE = OTH
		    SIZE = BYTE
		    CACHE = NO
		    INIT = IOPORT(2) LOC(3-0) 0111
		    INIT = IOPORT(1) LOC(5) 1

	CHOICE = "Enable  FPROM              8K ROM @ CC000h"
	LINK
	     MEMORY = 8K
		    ADDRESS = 00CC000h
		    WRITABLE = NO
		    MEMTYPE = OTH
		    SIZE = BYTE
		    CACHE = NO
		    INIT = IOPORT(2) LOC(3-0) 0110
		    INIT = IOPORT(1) LOC(5) 1

	CHOICE = "Enable  FPROM              8K ROM @ CA000h"
	LINK
	     MEMORY = 8K
		    ADDRESS = 00CA000h
		    WRITABLE = NO
		    MEMTYPE = OTH
		    SIZE = BYTE
		    CACHE = NO
		    INIT = IOPORT(2) LOC(3-0) 0101
		    INIT = IOPORT(1) LOC(5) 1

	CHOICE = "Enable  FPROM              8K ROM @ C8000h"
	LINK
	     MEMORY = 8K
		    ADDRESS = 00C8000h
		    WRITABLE = NO
		    MEMTYPE = OTH
		    SIZE = BYTE
		    CACHE = NO
		    INIT = IOPORT(2) LOC(3-0) 0100
		    INIT = IOPORT(1) LOC(5) 1

	CHOICE = "Enable  FPROM              8K ROM @ C6000h"
	LINK
	     MEMORY = 8K
		    ADDRESS = 00C6000h
		    WRITABLE = NO
		    MEMTYPE = OTH
		    SIZE = BYTE
		    CACHE = NO
		    INIT = IOPORT(2) LOC(3-0) 0011
		    INIT = IOPORT(1) LOC(5) 1
		
	CHOICE = "Enable  FPROM              8K ROM @ C4000h"
	LINK
	     MEMORY = 8K
		    ADDRESS = 00C4000h
		    WRITABLE = NO
		    MEMTYPE = OTH
		    SIZE = BYTE
		    CACHE = NO
		    INIT = IOPORT(2) LOC(3-0) 0010
		    INIT = IOPORT(1) LOC(5) 1
			
	CHOICE = "Enable  FPROM              8K ROM @ C2000h"
	LINK
	     MEMORY = 8K
		    ADDRESS = 00C2000h
		    WRITABLE = NO
		    MEMTYPE = OTH
		    SIZE = BYTE
		    CACHE = NO
		    INIT = IOPORT(2) LOC(3-0) 0001
		    INIT = IOPORT(1) LOC(5) 1
			
	CHOICE = "Enable  FPROM              8K ROM @ C0000h"
	LINK
	     MEMORY = 8K
		    ADDRESS = 00C0000h
		    WRITABLE = NO
		    MEMTYPE = OTH
		    SIZE = BYTE
		    CACHE = NO
		    INIT = IOPORT(2) LOC(3-0) 0000
		    INIT = IOPORT(1) LOC(5) 1
			
	CHOICE = "Enable  FPROM (Boot PROM)  8K ROM @ DC000h"
	LINK
	    MEMORY = 8K
		    ADDRESS = 00DC000h
		    WRITABLE = NO
		    MEMTYPE = OTH
		    SIZE = BYTE
		    CACHE = NO
		    INIT = IOPORT(2) LOC(3-0) 1110
		    INIT = IOPORT(1) LOC(5) 0
			
	CHOICE = "Enable  FPROM (Boot PROM)  8K ROM @ DA000h"
	LINK
	    MEMORY = 8K
		    ADDRESS = 00DA000h
		    WRITABLE = NO
		    MEMTYPE = OTH
		    SIZE = BYTE
		    CACHE = NO
		    INIT = IOPORT(2) LOC(3-0) 1101
		    INIT = IOPORT(1) LOC(5) 0

	CHOICE = "Enable  FPROM (Boot PROM)  8K ROM @ D8000h"
	LINK
	    MEMORY = 8K
		    ADDRESS = 00D8000h
		    WRITABLE = NO
		    MEMTYPE = OTH
		    SIZE = BYTE
		    CACHE = NO
		    INIT = IOPORT(2) LOC(3-0) 1100
		    INIT = IOPORT(1) LOC(5) 0
		
	CHOICE = "Enable  FPROM (Boot PROM)  8K ROM @ D6000h"
	LINK
	     MEMORY = 8K
		    ADDRESS = 00D6000h
		    WRITABLE = NO
		    MEMTYPE = OTH
		    SIZE = BYTE
		    CACHE = NO
		    INIT = IOPORT(2) LOC(3-0) 1011
		    INIT = IOPORT(1) LOC(5) 0

	CHOICE = "Enable  FPROM (Boot PROM)  8K ROM @ D4000h"
	LINK
	     MEMORY = 8K
		    ADDRESS = 00D4000h
		    WRITABLE = NO
		    MEMTYPE = OTH
		    SIZE = BYTE
		    CACHE = NO
		    INIT = IOPORT(2) LOC(3-0) 1010
		    INIT = IOPORT(1) LOC(5) 0

	CHOICE = "Enable  FPROM (Boot PROM)  8K ROM @ D2000h"
	LINK
	     MEMORY = 8K
		    ADDRESS = 00D2000h
		    WRITABLE = NO
		    MEMTYPE = OTH
		    SIZE = BYTE
		    CACHE = NO
		    INIT = IOPORT(2) LOC(3-0) 1001
		    INIT = IOPORT(1) LOC(5) 0

	CHOICE = "Enable  FPROM (Boot PROM)  8K ROM @ D0000h"
	LINK
	     MEMORY = 8K
		    ADDRESS = 00D0000h
		    WRITABLE = NO
		    MEMTYPE = OTH
		    SIZE = BYTE
		    CACHE = NO
		    INIT = IOPORT(2) LOC(3-0) 1000
		    INIT = IOPORT(1) LOC(5) 0

	CHOICE = "Enable  FPROM (Boot PROM)  8K ROM @ CE000h"
	LINK
	     MEMORY = 8K
		    ADDRESS = 00CE000h
		    WRITABLE = NO
		    MEMTYPE = OTH
		    SIZE = BYTE
		    CACHE = NO
		    INIT = IOPORT(2) LOC(3-0) 0111
		    INIT = IOPORT(1) LOC(5) 0

	CHOICE = "Enable  FPROM (Boot PROM)  8K ROM @ CC000h"
	LINK
	     MEMORY = 8K
		    ADDRESS = 00CC000h
		    WRITABLE = NO
		    MEMTYPE = OTH
		    SIZE = BYTE
		    CACHE = NO
		    INIT = IOPORT(2) LOC(3-0) 0110
		    INIT = IOPORT(1) LOC(5) 0

	CHOICE = "Enable  FPROM (Boot PROM)  8K ROM @ CA000h"
	LINK
	     MEMORY = 8K
		    ADDRESS = 00CA000h
		    WRITABLE = NO
		    MEMTYPE = OTH
		    SIZE = BYTE
		    CACHE = NO
		    INIT = IOPORT(2) LOC(3-0) 0101
		    INIT = IOPORT(1) LOC(5) 0

	CHOICE = "Enable  FPROM (Boot PROM)  8K ROM @ C8000h"
	LINK
	     MEMORY = 8K
		    ADDRESS = 00C8000h
		    WRITABLE = NO
		    MEMTYPE = OTH
		    SIZE = BYTE
		    CACHE = NO
		    INIT = IOPORT(2) LOC(3-0) 0100
		    INIT = IOPORT(1) LOC(5) 0

	CHOICE = "Enable  FPROM (Boot PROM)  8K ROM @ C6000h"
	LINK
	     MEMORY = 8K
		    ADDRESS = 00C6000h
		    WRITABLE = NO
		    MEMTYPE = OTH
		    SIZE = BYTE
		    CACHE = NO
		    INIT = IOPORT(2) LOC(3-0) 0011
		    INIT = IOPORT(1) LOC(5) 0
		
	CHOICE = "Enable  FPROM (Boot PROM)  8K ROM @ C4000h"
	LINK
	     MEMORY = 8K
		    ADDRESS = 00C4000h
		    WRITABLE = NO
		    MEMTYPE = OTH
		    SIZE = BYTE
		    CACHE = NO
		    INIT = IOPORT(2) LOC(3-0) 0010
		    INIT = IOPORT(1) LOC(5) 0
			
	CHOICE = "Enable  FPROM (Boot PROM)  8K ROM @ C2000h"
	LINK
	     MEMORY = 8K
		    ADDRESS = 00C2000h
		    WRITABLE = NO
		    MEMTYPE = OTH
		    SIZE = BYTE
		    CACHE = NO
		    INIT = IOPORT(2) LOC(3-0) 0001
		    INIT = IOPORT(1) LOC(5) 0
			
	CHOICE = "Enable  FPROM (Boot PROM)  8K ROM @ C0000h"
	LINK
	     MEMORY = 8K
		    ADDRESS = 00C0000h
		    WRITABLE = NO
		    MEMTYPE = OTH
		    SIZE = BYTE
		    CACHE = NO
		    INIT = IOPORT(2) LOC(3-0) 0000
		    INIT = IOPORT(1) LOC(5) 0

FUNCTION = "Card disable"
	SHOW = NO
	COMMENTS = "Disabling the card resets the LAN controller.\n
	Sets the card in a defined state after soft reset, too."
	CHOICE = "Card disable"
	FREE
	INIT = IOPORT(3) LOC(0) 0