BOARD
     ID          = "ICU1000"
     NAME        = "NCL538/NCL539"
     MFR         = "National Computer Ltd."
     VERSION     = 1,0
     CATEGORY    = "MSD"
     SLOT        = ISA16
     COMMENTS    = "Floppy Drives Supported: NCL 538: Two 360KB, 720KB, 1.2MB,\n
                    or 1.44MB; NCL 539: None"

JUMPER(1) = 1
     NAME = "Floppy Drive port Address"
     JTYPE = TRIPOLE
     VERTICAL = NO
     LABEL = LOC(1) "JP1"
     FACTORY = LOC(1) 0
JUMPER(2) = 1
     NAME = "BIOS Address"
     JTYPE = TRIPOLE
     VERTICAL = NO
     LABEL = LOC(1) "JP2"
     FACTORY = LOC(1) 1
JUMPER(3) = 1
     NAME = "Floppy Drive Interrupt"
     JTYPE = TRIPOLE
     VERTICAL = NO
     LABEL = LOC(1) "JP3"
     FACTORY = LOC(1) 0
JUMPER(4) = 1
     NAME = "Floppy Drive DMA ACK"
     JTYPE = TRIPOLE
     VERTICAL = NO
     LABEL = LOC(1) "JP4"
     FACTORY = LOC(1) 0
JUMPER(5) = 1
     NAME = "IRQ Buffered"
     JTYPE = TRIPOLE
     VERTICAL = NO
     LABEL = LOC(1) "JP5"
     FACTORY = LOC(1) 0
JUMPER(6) = 1
     NAME = "Floppy Drive DMA Request"
     JTYPE = TRIPOLE
     VERTICAL = NO
     LABEL = LOC(1) "JP6"
     FACTORY = LOC(1) 0
JUMPER(7) = 1
     NAME = "Hard Drive Interrupt"
     JTYPE = TRIPOLE
     VERTICAL = NO
     LABEL = LOC(1) "JP7"
     FACTORY = LOC(1) 0
JUMPER(8) = 1
     NAME = "Zero wait state"
     JTYPE = PAIRED
     VERTICAL = NO
     LABEL = LOC(1) "JP8"
     FACTORY = LOC(1) 0
JUMPER(9) = 1
     NAME = "BIOS"
     JTYPE = PAIRED
     VERTICAL = NO
     LABEL = LOC(1) "JP9"
     FACTORY = LOC(1) 0
JUMPER(10) = 1
     NAME = "Hard Drive Port Address"
     JTYPE = PAIRED
     VERTICAL = NO
     LABEL = LOC(1) "JP10"
     FACTORY = LOC(1) 0
JUMPER(11) = 1
     NAME = "Mode"
     JTYPE = PAIRED
     VERTICAL = NO
     LABEL = LOC(1) "JP11"
     FACTORY = LOC(1) 0

FUNCTION = "BIOS Address"
     CHOICE = "C8000"
       FREE
       MEMORY = 16K
       ADDRESS = 0C8000H 
       WRITABLE = NO
       MEMTYPE = OTH
       SHARE = NO
       INIT = JUMPER(2) LOC(1) 0
     CHOICE = "CC000"
       FREE
       MEMORY = 16K
       ADDRESS = 0CC000H 
       WRITABLE = NO
       MEMTYPE = OTH
       SHARE = NO
       INIT = JUMPER(2) LOC(1) 1
     CHOICE = "Disabled"
       DISABLE = YES

FUNCTION = "Floppy Drive Port Address"
     CHOICE = "3F2-3F7"
       FREE
       PORT = 03F2H-03F7H
       INIT = JUMPER(1) LOC(1) 0
     CHOICE = "372-377"
       FREE
       PORT = 0372H-0377H
       INIT = JUMPER(1) LOC(1) 1
     CHOICE = "Disabled"
       DISABLE = YES
FUNCTION = "Floppy Drive Interrupt"
     CHOICE = "IRQ6"
       FREE
       IRQ = 6
       INIT = JUMPER(3) LOC(1) 0
     CHOICE = "IRQ10"
       FREE
       IRQ = 10
       INIT = JUMPER(3) LOC(1) 1
     CHOICE = "Disabled"
       DISABLE = YES

FUNCTION = "Floppy Drive DMA ACK"
     CHOICE = "DACK2"
       FREE
       DMA = 2
       SHARE = "DMA2"
       INIT = JUMPER(4) LOC(1) 0
     CHOICE = "DACK3"
       FREE
       DMA = 3
       SHARE = "DMA3"
       INIT = JUMPER(4) LOC(1) 1

FUNCTION = "IRQ Buffered"
     CHOICE = "Non Buffered"
       FREE
       INIT = JUMPER(5) LOC(1) 0
     CHOICE = "Buffered"
       FREE
       INIT = JUMPER(5) LOC(1) 1
     CHOICE = "Disabled"
       DISABLE = YES

FUNCTION = "Floppy Drive DMA Request"
     CHOICE = "DRQ2"
       FREE
       DMA = 2
       SHARE = "DMA2"
       INIT = JUMPER(1) LOC(1) 0
     CHOICE = "DRQ3"
       FREE
       DMA = 3
       SHARE = "DMA3"
       INIT = JUMPER(1) LOC(1) 1

FUNCTION = "Hard Drive Interrupt"
     CHOICE = "IRQ14"
       FREE
       IRQ = 14
       INIT = JUMPER(7) LOC(1) 0
     CHOICE = "IRQ15"
       FREE
       IRQ = 15
       INIT = JUMPER(7) LOC(1) 1

FUNCTION = "Zero wait state"
    CHOICE = "Diabled"
       DISABLE = YES
       FREE
       INIT = JUMPER(8) LOC(1) 1
     CHOICE = "Enable"
       FREE
       INIT = JUMPER(8) LOC(1) 0
 
FUNCTION = "BIOS"
     CHOICE = "Enable"
       FREE
       INIT = JUMPER(9) LOC(1) 1
     CHOICE = "Diabled"
       DISABLE = YES
       FREE
       INIT = JUMPER(9) LOC(1) 0

FUNCTION = "Hard Drive Port Addres"
     CHOICE = "1F0-1F7"
       FREE
       PORT = 01F0H-01F7H
       INIT = JUMPER(10) LOC(1) 0
     CHOICE = "170-177"
       FREE
       PORT = 0170H-0177H
       INIT = JUMPER(10) LOC(1) 1

FUNCTION = "Mode"
     CHOICE = "Normal Operation"
       FREE
       INIT = JUMPER(11) LOC(1) 0
     CHOICE = "Self-diagnostic"
       FREE
       INIT = JUMPER(11) LOC(1) 1