;
; Hewlett-Packard 10/100VG EISA LAN Adapter (J2577A-80001)
; Configuration file version 2.10
; !HWP1940.CFG  08/17/94
;
; (C)Copyright Hewlett-Packard Co., 1993-1994
;    All Rights Reserved.
;

BOARD
   ID = "HWP1940"
   NAME = "HP 10/100VG Selectable EISA LAN Adapter (J2577A)"
   MFR = "Hewlett-Packard Co."
   CATEGORY = "NET"
   SLOT = EISA
   LENGTH = 220
   READID = YES
   BUSMASTER = 600
   AMPERAGE = 90
   IOCHECK = INVALID
   DISABLE = UNSUPPORTED
   COMMENTS = "The HP 10/100VG Selectable EISA LAN Adapter is a 32-bit Type
	       10Base-T/100VG compatible local area networking adapter.\n\n
	       Your adapter configuration parameters of
	       IRQ, Memory Map Location and Boot ROM Location may be
	       chosen using this EISA configuration utility to match the
	       requirements of your computer. Your adapter also must be set to
	       match the values selected.  Use the program
	       HPVGSET.EXE to set your adapter configuration parameters.
	       HPVGSET.EXE is on the adapter's Support Disk."

;
; I/O ports initialization Information Block
;
IOPORT(1) = 0ZC38h      ; Base I/O ports address
	SIZE = BYTE
IOPORT(2) = 0ZC3Ah      ; Page Reisgter
	SIZE = BYTE
IOPORT(3) = 0ZC45h      ; IRQ Selection Register
	SIZE = BYTE
IOPORT(4) = 0ZC40h      ; Memory-Mapped Address LSW
	SIZE = WORD
IOPORT(5) = 0ZC42h      ; Memory-Mapped Address MSW
	SIZE = WORD
IOPORT(6) = 0ZC42h      ; Boot ROM Configuration Register
	SIZE = WORD
IOPORT(7) = 0ZC3Ah      ; Option Register LSW
	SIZE = WORD

SOFTWARE(1) = "
 The following configuration parameters have been selected
 for the HP 10/100VG Selectable EISA LAN Adapter. The
 program HPVGSET.EXE must be used to
 configure your adapter to match these values.
 Your network software also may ask you for this data:"

FUNCTION = "HP 10/100VG Selectable EISA LAN Adapter (J2577A)"
   TYPE = "NET"
   CONNECTION  = "One modular 8-pin LAN connector for 10Base-T network, and\n
		  one modular 8-pin LAN connector for 100VG network"

   SUBFUNCTION = "Interrupt Channel (IRQ)"

	CHOICE = "3 - Edge (Factory default)"
		LINK
			IRQ = 3
			SHARE = NO
			TRIGGER = EDGE
			INIT = Software(1) "IRQ  3 (Edge)"

	CHOICE = "4 - Edge"
		LINK
			IRQ = 4
			SHARE = NO
			TRIGGER = EDGE
			INIT = Software(1) "IRQ  4 (Edge)"

	CHOICE = "5 - Edge"
		LINK
			IRQ = 5
			SHARE = NO
			TRIGGER = EDGE
			INIT = Software(1) "IRQ  5 (Edge)"

	CHOICE = "6 - Edge"
		LINK
			IRQ = 6
			SHARE = NO
			TRIGGER = EDGE
			INIT = Software(1) "IRQ  6 (Edge)"

	CHOICE = "7 - Edge"
		LINK
			IRQ = 7
			SHARE = NO
			TRIGGER = EDGE
			INIT = Software(1) "IRQ  7 (Edge)"

	CHOICE = "9 - Edge"
		LINK
			IRQ = 9
			SHARE = NO
			TRIGGER = EDGE
			INIT = Software(1) "IRQ  9 (Edge)"

	CHOICE = "10 - Edge"
		LINK
			IRQ = 10
			SHARE = NO
			TRIGGER = EDGE
			INIT = Software(1) "IRQ 10 (Edge)"

	CHOICE = "11 - Edge"
		LINK
			IRQ = 11
			SHARE = NO
			TRIGGER = EDGE
			INIT = Software(1) "IRQ 11 (Edge)"

	CHOICE = "12 - Edge"
		LINK
			IRQ = 12
			SHARE = NO
			TRIGGER = EDGE
			INIT = Software(1) "IRQ 12 (Edge)"

	CHOICE = "15 - Edge"
		LINK
			IRQ = 15
			SHARE = NO
			TRIGGER = EDGE
			INIT = Software(1) "IRQ 15 (Edge)"

	CHOICE = "3 - Level"
		LINK
			IRQ = 3
			SHARE = YES
			TRIGGER = LEVEL
			INIT = Software(1) "IRQ  3 (Level)"

	CHOICE = "4 - Level"
		LINK
			IRQ = 4
			SHARE = YES
			TRIGGER = LEVEL
			INIT = Software(1) "IRQ  4 (Level)"

	CHOICE = "5 - Level"
		LINK
			IRQ = 5
			SHARE = YES
			TRIGGER = LEVEL
			INIT = Software(1) "IRQ  5 (Level)"

	CHOICE = "6 - Level"
		LINK
			IRQ = 6
			SHARE = YES
			TRIGGER = LEVEL
			INIT = Software(1) "IRQ  6 (Level)"

	CHOICE = "7 - Level"
		LINK
			IRQ = 7
			SHARE = YES
			TRIGGER = LEVEL
			INIT = Software(1) "IRQ  7 (Level)"

	CHOICE = "9 - Level"
		LINK
			IRQ = 9
			SHARE = YES
			TRIGGER = LEVEL
			INIT = Software(1) "IRQ  9 (Level)"

	CHOICE = "10 - Level"
		LINK
			IRQ = 10
			SHARE = YES
			TRIGGER = LEVEL
			INIT = Software(1) "IRQ  10 (Level)"

	CHOICE = "11 - Level"
		LINK
			IRQ = 11
			SHARE = YES
			TRIGGER = LEVEL
			INIT = Software(1) "IRQ  11 (Level)"

	CHOICE = "12 - Level"
		LINK
			IRQ = 12
			SHARE = YES
			TRIGGER = LEVEL
			INIT = Software(1) "IRQ  12 (Level)"

	CHOICE = "15 - Level"
		LINK
			IRQ = 15
			SHARE = YES
			TRIGGER = LEVEL
			INIT = Software(1) "IRQ  15 (Level)"

   SUBFUNCTION = "Memory-Mapped I/O"
	HELP = "The memory-mapped I/O may be utilized by high performance
		network drivers,
		consult your network driver documentation.\n\n
		It is OK if the memory address selected overlaps the address
		used for a boot ROM on the same adapter, but overlap is not
		allowed by this EISA utility. A conflict notice occurs.
		If address overlap exists, use the
		EISA utility to enable the boot ROM at the address and disable
		memory-mapped I/O. Then, enable both boot ROM and
		memory-mapped I/O
		using the adapter's HPVGSET.EXE program.\n"

	CHOICE = "DISABLE"
		DISABLE = YES
		LINK
			INIT = Software(1) "MEM MAP DISABLED"

	CHOICE = "C8000h"
		LINK
			MEMORY = 8192
			ADDRESS = 0C8000h
			WRITABLE = YES
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
			INIT = Software(1) "MEM MAP at C8000h"

	CHOICE = "CC000h"
		LINK
			MEMORY = 8192
			ADDRESS = 0CC000h
			WRITABLE = YES
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
			INIT = Software(1) "MEM MAP at CC000h"

	CHOICE = "D0000h"
		LINK
			MEMORY = 8192
			ADDRESS = 0D0000h
			WRITABLE = YES
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
			INIT = Software(1) "MEM MAP at D0000h"

	CHOICE = "D4000h"
		LINK
			MEMORY = 8192
			ADDRESS = 0D4000h
			WRITABLE = YES
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
			INIT = Software(1) "MEM MAP at D4000h"

	CHOICE = "D8000h"
		LINK
			MEMORY = 8192
			ADDRESS = 0D8000h
			WRITABLE = YES
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
			INIT = Software(1) "MEM MAP at D8000h"

	CHOICE = "DC000h"
		LINK
			MEMORY = 8192
			ADDRESS = 0DC000h
			WRITABLE = YES
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
			INIT = Software(1) "MEM MAP at DC000h"

	CHOICE = "E0000h"
		LINK
			MEMORY = 8192
			ADDRESS = 0E0000h
			WRITABLE = YES
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
			INIT = Software(1) "MEM MAP at E0000h"

	CHOICE = "E4000h"
		LINK
			MEMORY = 8192
			ADDRESS = 0E4000h
			WRITABLE = YES
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
			INIT = Software(1) "MEM MAP at E4000h"

	CHOICE = "E8000h"
		LINK
			MEMORY = 8192
			ADDRESS = 0E8000h
			WRITABLE = YES
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
			INIT = Software(1) "MEM MAP at E8000h"

	CHOICE = "EC000h"
		LINK
			MEMORY = 8192
			ADDRESS = 0EC000h
			WRITABLE = YES
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
			INIT = Software(1) "MEM MAP at EC000h"

       CHOICE = "Above 1 Meg, auto select"
	 HELP = "The 'Above 1 Meg, auto select' choice will select an address
		above the end of installed memory. Select Options -
		Auto Verify for this automatic selection to be made.
		Then select View - Resources to view the address selected.
		Note this address and set this address on the adapter
		using HPVGSET.EXE."
		LINK
			MEMORY = 8192
			INIT = Software(1) "MEM MAP above 1 Meg"
			ADDRESS = 0100000h - 0FFF800h STEP = 8192
			WRITABLE = YES
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO

   SUBFUNCTION = "Boot ROM"
	HELP = " A boot ROM may be installed to allow system boot from a
		network server.\n\n
		It is OK if the boot ROM address selected overlaps the
		address used for memory-mapped I/O on the same adapter,
		but overlap is not allowed by this EISA utility. A conflict
		notice occurs. If address overlap exists, use the
		EISA utility to enable the boot ROM at the address and disable
		memory-mapped I/O. Then, enable both boot ROM and
		memory-mapped I/O using the adapter's HPVGSET.EXE program.\n"

	CHOICE = "DISABLE"
		DISABLE = YES
		LINK
			INIT = Software(1) "BOOT ROM DISABLED"

	CHOICE = "8K at C000h"
	    FREE
		MEMORY = 8K
		ADDRESS = 0C0000h
			WRITABLE = NO
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
			INIT = Software(1) "8K BOOT ROM at C0000h"

	CHOICE = "8K at D000h"
	    FREE
		MEMORY = 8K
		ADDRESS = 0D0000h
			WRITABLE = NO
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
			INIT = Software(1) "8K BOOT ROM at D0000h"

	CHOICE = "8K at E000h"
	    FREE
		MEMORY = 8K
		ADDRESS = 0E0000h
			WRITABLE = NO
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
			INIT = Software(1) "8K BOOT ROM at E0000h"

	CHOICE = "12K at C000h"
	    FREE
		MEMORY = 8K
		ADDRESS = 0C0000h
			WRITABLE = NO
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
			INIT = Software(1) "12K BOOT ROM at C0000h"

	CHOICE = "12K at D000h"
	    FREE
		MEMORY = 8K
		ADDRESS = 0D0000h
			WRITABLE = NO
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
			INIT = Software(1) "12K BOOT ROM at D0000h"

	CHOICE = "12K at E000h"
	    FREE
		MEMORY = 8K
		ADDRESS = 0E0000h
			WRITABLE = NO
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
			INIT = Software(1) "12K BOOT ROM at E0000h"

	CHOICE = "16K at C000h"
	    FREE
		MEMORY = 8K
		ADDRESS = 0C0000h
			WRITABLE = NO
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
			INIT = Software(1) "16K BOOT ROM at C0000h"

	CHOICE = "16K at D000h"
	    FREE
		MEMORY = 8K
		ADDRESS = 0D0000h
			WRITABLE = NO
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
			INIT = Software(1) "16K BOOT ROM at D0000h"

	CHOICE = "16K at E000h"
	    FREE
		MEMORY = 8K
		ADDRESS = 0E0000h
			WRITABLE = NO
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
			INIT = Software(1) "16K BOOT ROM at E0000h"