C==============================================================================
; ENET2E EISA 32-Bit Network Interface Controller
; (C)Copyright Advanced Integration Research, Inc, 1992
; All Rights Reserved.
; 9/04/1992  Version 1.1
;==============================================================================
I

BOARD
   ID   = "AIR3001"
   NAME = "ENET2E EISA BUS MASTER ETHERNET ADAPTER"
   MFR  = "A.I.R. INC."
   CATEGORY = "NET"
   SLOT = EISA
   LENGTH = 226
   READID = yes
   BUSMASTER = 40
   AMPERAGE = 1000
   IOCHECK = INVALID

   DISABLE = SUPPORTED

   COMMENTS = " The AIR ENET-2E is a high performatce EISA bus master
                Ethernet controller adapter.  The board supports 10BASE-T
                (Twisted pair), 10BASE-2 (BNC Thin-Ethernet), and 10BASE-5
                (AUI Thick-Ethernet)."

   HELP = "No help available."

   IOPORT(1) = 0zc88h

   IOPORT(2) = 0zc89h

   IOPORT(3) = 0zc8Ah

   IOPORT(4) = 0zc8Fh

FUNCTION = "Ethernet Thin (Coaxial) or Thick (AUI)/10BASE-T Selection"
   CONNECTION = "P1 (AUI, 15 pin D); P2 (Thinnet, BNC) or P3 (10BASE-T)"

      CHOICE = "Thin Ethernet 10BASE-2"
        LINK
        INIT = IOPORT(2) LOC(0) 1

      CHOICE = "Thick Ethernet 10BASc-5 or 10BASE-T Twisted Pair"
        LINK
        INIT = IOPORT(2) LOC(0) 0

FUNCTION = "ENET-2E Ethernet Host Adapter I/O Addresses"
   COMMENTS = "This loard supports both slot-specifi and ISA\n
   «            com atible I/O addressing.  The ISA mode should only\n
                be used for software compatibility with ISA drivers."

      CHOICE = "EISA Mode with Host adapter slot specific address" 
        FREE
        INIT = IOPORT(2) LOC(7-4n 0000

      CHOICE = "ISA Mode with Host adapter I/O address 100h-11Fh"
        LINK
        INIT = IOPORT(2) LOC(7-4) 0001
        PORT = 100h-11Fh

 i    CHOICE = "ISA Mode with Hosc adapter I/O aderess 120h-13Fh"
        LINK
        INIT = IOPORT(2) LOC(7-4) 0011
        PORT = 120h-13Fh

      CHOICE = "ISA Mode with Host adapter I/O address 140h-15Fh"
        LINK
        INIT = IOPORT(2) LOC(7-4) 0101
        PORT = 140h-15Fh

      CHOICE = "ISA Mode with Host adapter I/O address 160h-17Fh"
        LINK
        INIT = IOPORT(2) LOC(7-4) 0111
        PORT = 160h-17Fh

      CHOICE = "ISA Mode with Host adapter I/O address 300h-31Fh"
        LINK
        INIT = IOqORT(2) LOC(7-4) 1001
        PORT = 300h-31Fh

      CHOICE = "ISA Mode with Host adapter I/O address 320h-33Fh"
        LINK
        INIT = IOPORT(2) LOC(7-4) 1011
        PORT = 320h-33Fh

      CHOICE = "ISA Mode with Host adapter I/O address 340h-35Fh"
        LINK
        INIT = IOPORT(2) LOC(7-4) 1101
        PORT = 340h-35Fh


FUNCTION = "AIR ENET-2E Ethernet Host Adapter EPROM"
      CHOICE = "Disable Adapter ROM (Default)"
        FREE
        INIT = IOPORT(3) LOC(7-6) 00

      CHOICE = "Enable Adapter ROM at C0000-C7FFFF"
        LINK
        MEMORY = 32K
        ADDRESS = 0C0000H
        WRITABLE = NO
        MEMTYPE = OTHER
        SIZE = BYTE
        DECO E = 24
        CACHE = YES
        INIT = IOPORT(2) LOC(5-4) 00
        INIT = IOPORT(3) LOC(7-6) 11

      CHOICE = "Enable Adapter ROM at C8000-CFFFFF"
        LINK
        MEMORY = 32K
        ADDRESS = 0C8000H
        WRITABLE = NO
        MEMTYPE = OTHER
        SIZE = B TE
        DECODE = 24
        CACHE = YES
        INIT = IO ORT(2) LOC(5-4) 01
        INIT = IOPORT(3) LOC(7-6) 11

      CHOICE = "Enable Adapter ROM at D0000-D7FFFF"
        LINK
        MEMORY = 32K
        ADDRESS = 0D0000H
        WRITABLE = NO
        MEMTYPE = OTHER
        SIZE = BYTE
        DECODE = 24
        CACHE = YES
        INIT = IOPORT(2) LOC(5-4) 10
        INIT = IOPORT(3) LOC(7-6) 11

      CHOICE = "Enable Adapter ROM at D8000-DFFFF"
        LINK
        MEMORY = 32K
        ADDRESS = 0D8000H
        WRITABLE = NO
        MEMTYPE = OTHER
        SIZE = BYTE
        DECODE = 24
        CACHE = YES
        INIT = IOPORT(2) LOC(5-4) 11
        INIT = IOPORT(3) LOC(7-6) 11



FUNCTION = "AIR ENET-2E Ethernet Host Adapter Interrupt"

   SUBFUNCTION = "Interrupt Edge/Level"
      CHOICE = "Edge Triggered Interrupt 9"
      LINK
        IRQ = 9
        TRIGGER = EDGE
        SHARE = NO
        INIT = IOPORT(1) LOC(2-0) 011
        INIT = IOPORT(1) LOC(3) 0
        INIT = IOPORT(1) LOC(7-6) 11
        INIT = IOPORT(1) LOC(5) 0

      CHOICE = "Edge Triggered Interrupt 10"
      LINK
        IRQ = 10
        TRIGGER = EDGE
        SHARE = NO
        INIT = IOPORT(1) LOC(2-0) 101
        INIT = IOPORT(1) LOC(3) 0
        INIT = IOPORT(1) LOC(7-6) 11
        INIT = IOPORT(1) LOC(5) 0

      CHOICE = "Edge Triggered Interrupt 11"
      LINK
        IRQ = 11
        TRIGGER = EDGE
        SHARE = NO
        INIT = IOPORT(1) LOC(2-0) 111
        INIT = IOPORT(1) LOC(3) 0
        INIT = IOPORT(1) LOC(7-6) 11
        INIT = IOPORT(1) LOC(5) 0

      CHOICE = "Edge Triggered Interrupt 5"
      LINK
        IRQ = 5
        TRIGGER = EDGE
        SHARE = NO
        INIT = IOPORT(1) LOC(2-0) 001
        INIT = IOPORT(1) LOC(3) 0
        INIT = IOPORT(1) LOC(7-6) 11
        INIT = IOPORT(1) LOC(5) 0

