BOARD
	ID="ADP7770"
	NAME="NetServer LM AIC-7770 Integrated SCSI Host Adapter"
	MFR="Hewlett-Packard Co."
	CATEGORY="MSD"
	SLOT=EMB(9)
	LENGTH=0
	AMPERAGE=1000
	SKIRT=NO
	READID=YES
	BUSMASTER=50
	IOCHECK=VALID
	DISABLE=SUPPORTED
	COMMENTS="Embedded AIC-7770 Configuration File Ver. 1.02 Custom.  
    NOTE: This is a customized version of the AIC-7770 EISA configuration 
    file for use with the embedded AIC-7770 SCSI controller on HP
    NetServer LM system boards. It should not be used with other system boards."

IOPORT(6)=0zc84h                        ;SCSI Enable/Disable 
	INITVAL = rrrrrrrX                                      

IOPORT(1)=0zc87h                        ;Host configuration definition
	INITVAL = 0X00X00X                  ; PwrDwn mode; IRQ mode; Reset;

IOPORT(4)=0zc5ch                        ;Interrupt definition
	INITVAL = X000XXXX                                      

IOPORT(2)=0zc5dh                        ;Host configuration definition
	INITVAL = XXXXXX00                  ; Data FIFO Thrshld; Bus release time

IOPORT(3)=0zc5ah                        ;SCSI configuration
	SIZE = WORD
	INITVAL = 0XXXXXXX0XXXXXXX

IOPORT(5)=0zc5fh                        ;Host configuration definition
    INITVAL = 00XXXXXX                  ;used by !adp7771.cfg

IOPORT(7)=0zc5fh                        ;Host configuration definition
    INITVAL = rrrrXrrr                  ;bit 3 = Channel Select


INCLUDE  = "ADP7770.OVL"                ;Line 40